Rexroth A2F hydraulic pump is a compact and highly efficient double-diaphragm pump for mobile machinery. The Rexroth A2F is a positive displacement pump with an external rotor, which provides good heat dissipation due to its large surface area. The dual diaphragm design provides an efficient self-priming capability and eliminates the need for an external priming unit.
The Rexroth A2F is ideal for applications requiring high pressure and flow rates in compact dimensions. It is used in mining machinery, agricultural machinery, construction equipment and other mobile machinery where reliability and efficiency are important factors.
Rexroth A2F Hydraulic Pump Key Benefits:
With the Rexorth A2F hydraulic pump, a small engine can be used to produce more power.
The A2F hydraulic pump is a compact and lightweight pump that can be used to power agricultural equipment, small tractors or other farm machinery. With the Rexorth A2F hydraulic pump, a small engine can be used to produce more power. The Rexorth A2F hydraulic pump features a 5 GPM empty flow and a 10 GPM full flow and can operate at up to 6500 RPM.
The Rexorth A2F hydraulic pump has a diameter of 12 inches with a length of 23 inches, which makes it an ideal solution for smaller engines and machines. The Rexorth A2F hydraulic pump has an operating pressure of between 400-600 PSI with an operating temperature of -30°F to +250°F (with no freezing). The hydraulic fluid needs to be DOT 4 or SAE 80W90 gear oil. This hydraulic pump can be mounted horizontally or vertically depending on how you want to use it.
The Rexorth A2F hydraulic pump is designed for all weather conditions so it is ideal for use in any environment including cold climates where there are lots of snowstorms throughout winter months.
The Rexorth A2F hydraulic pump is cost effective and one of the most commonly used hydraulic pumps.
The Rexorth A2F hydraulic pump is cost effective and one of the most commonly used hydraulic pumps. This hydraulic pump is well known for its high performance and durability. It has a wide range of applications such as construction machinery, agricultural machinery and earth moving equipment.
The Rexorth A2F hydraulic pump is a high pressure axial piston pump with a control valve mounted on top of the gear case which allows for both a variable displacement and variable flow rate. The Rexorth A2F hydraulic pump comes in two models: A2F-02M-E3/4 and A2F-04M-E3/4
The Rexorth A2F-02M-E3/4 has an input shaft speed of 2,400 RPM (1) and an output shaft speed of 2,400 RPM (1). It has a capacity of 2.5 liters per minute at 100 bar (1400 PSI) working pressure with a maximum flow rate of 2.5 liters per minute at 100 bar (1400 PSI). This particular model has an output torque of 7 Nm at 100 bar (1400 PSI).
The Rexorth A2F hydraulic pump uses a bent axis design that provides easy maintenance at lower costs.
The Rexorth A2F hydraulic pump is a vertical single acting double diaphragm pump with axial flow and a bent axis design. It has two diaphragms, one of which is mounted on the casing, while the other one is mounted on an eccentric shaft. The eccentric shaft is connected to a piston rod that provides the pumping action. This type of hydraulic pump has many advantages over conventional pumps, including reduced wear and tear, longer life expectancy and less maintenance cost.
The Rexorth A2F hydraulic pump provides workers with more precise and smooth control over operations.
The Rexorth A2F hydraulic pump is designed to be used in agricultural machinery and construction equipment as well as for many other industrial applications. It is available in several different sizes and pressure ratings.
The Rexorth A2F hydraulic pump provides workers with more precise and smooth control over operations. It offers high performance with low noise levels and can handle continuous duty cycles at temperatures up to 200 degrees Celsius.
The Rexorth A2F also features a compact design that makes it easy to install on machines or in vehicles where space is limited. The unit’s compact size also helps reduce fuel consumption and emissions while offering improved engine performance when compared to conventional pumps. This makes the Rexorth A2F ideal for use in vehicles powered by diesel engines, including trucks, buses and tractors.
The Rexorth A2F hydraulic pump’s bent axis design helps it to operate at both high and low speeds with minimal vibration.
Rexroth’s A2F hydraulic pump is a high-speed, single-stage pump that delivers low-vibration performance. It features a bent axis design that enables the pump to operate at both high and low speeds with minimal vibration.
The Rexroth A2F hydraulic pump has a compact design with a small footprint and low weight. The axial piston pump is designed for use in applications requiring high pressure and flow rates or low noise levels. The pump has no eccentric shaft or housing, allowing for reduced vibration at all speeds.
The pump’s bent axis design helps it to operate at both high and low speeds with minimal vibration. It also features self-priming capability and an automatic shutoff device that prevents loss of lubricant when the cylinder is turned off while pressure remains in the cylinder bore.
The Rexroth A2F hydraulic pump includes a range of options for power head mounting configurations: front mounted with flange; side mounted with flange; front mounted without flange; or side mounted without flange (only available for displacement sizes of 1 cc).
U Rexorth A2F pump is one of the most efficient hydraulics on the market.
The Rexorth A2F hydraulic pump has been designed to be highly efficient and very reliable. It uses a positive displacement design that allows it to run at lower speeds while still producing a high pressure output. This means that it can be used in applications where a high flow rate is needed along with high pressure output such as rock crushing machines or other heavy duty machinery.
This type of efficiency is also important when it comes to reducing energy consumption which makes it an ideal choice for those looking to save money on their energy costs over time.
If you’re in the market for a new hydraulic pump, Rexorth should be among your top considerations. The company is dedicated to delivering high-quality, American-made pumps, and they have the track record to prove it. Take a closer look at their A2F series if you plan on keeping the diesel engine going for many years. It’s built to last.