ziplevel ezdepth for excavators – ezd-30 attachment manufacturer from Australia, who have been developing and refining their ez level system for the last 9 years. ziplevel’s ez depth is designed to give you improved visibility while digging in some of the most unforgiving terrain in Australia.
Primary depth measurement system of the ziplevel ezdepth
The primary depth measurement system of the ZipLevel EZDepth consists of a pressure sensor, an electronic module, and a liquid crystal display (LCD). The pressure sensor is housed in a metal housing with a metal diaphragm at the bottom. This diaphragm protects the sensor from damage, which could be caused by impact, when dropped or stepped on. The sensor measures gas (air) pressure relative to atmospheric pressure.
The LCD is mounted on top of the electronic module, which converts the analog output from the pressure sensor into digital values. This data is then sent to the microprocessor that controls the LCD. The LCD shows both the digital value and a bar graph that indicates the depth measurement in inches or centimeters.
The ZipLevel EZDepth can measure up to 250 feet below ground level with an accuracy of +/- 0.1 inches or +/- 2 mm.
The Ziplevel Pro-2000 is a precision elevation measuring system that finds the exact level point on any horizontal plane in seconds by using an air bubble trapped in a small vial. The trapped air bubble is trapped in a small vial and floats between two surface areas (a heavy liquid and another heavy liquid with a surfactant). When the vial is exactly level, these three forces are balanced and the bubble rests at the center of the vial.
The vial is lit from above with a bright LED light which passes through the bubble and reflects off the bottom surface of the vial. This reflection changes brightness with changing tilt angle. A photo diode detects this changing brightness and feeds it into electronic circuits that convert it into an analog signal proportional to tilt angle. This signal is then fed into digital circuitry that converts it into a digital signal proportional to tilt angle – this is what you see on your screen.
The ziplevel ezdepth for excavators – ezd-30 to grade within 1/8th inch, even in the dark!
Positioning of your structure is critical to its life expectancy. The ZipLevel is a simple and accurate tool that any operator can use to evenly grade playsets, pool decks, base materials for sheds and other structures. Our patented measuring system removes the guesswork from your day and gets you the right depth every time.
The ziplevel ez-depth for excavators – ezd-30 to grade within 1/8th inch, even in the dark! The ziplevel ezdepth for excavators – ezd-30 is accurate to within 1/8th inch anywhere on your worksite. The operator can quickly see the display of the excavator bucket height against the laser reference plane (grade) and adjust to a consistent depth or slope.
This eliminates stakeout time, gives you real-time grade checking, and reduces rework by controlling grade automatically with your existing GPS system. The ziplevel ezdepth for excavators – ezd-30 is a cost effective solution that provides increased productivity and profitability on your job site.
The ziplevel ezdepth for excavators – ezd-30 is accurate to within 1/8th inch anywhere on your worksite. The operator can quickly see the display of the excavator bucket height against the laser reference plane (grade) and adjust to a consistent depth or slope. This eliminates stakeout time, gives you real-time grade checking, and reduces rework by controlling grade automatically with your existing GPS system.
Improving accuracy and efficiency on your job site is just a few clicks away with the Ziplevel EZDepth for excavators-ezd-30
Accurate grading is critical to the success of any construction project. Poorly graded or over-excavated sites can result in costly delays, rework, and damage to adjacent structures. Whether you’re a contractor, excavator, surveyor or grade checker, the Ziplevel EZDepth for excavators provides you with an accurate, convenient method for achieving optimal grades.
The EZDepth for excavators can be mounted on virtually any excavator in minutes and is a great tool for both rough and final grading. It’s easy to get started… just mount it on your excavator, power it on and begin grading!
Giving operators real-time depth feedback, the EZDepth improves job quality and increases productivity by reducing over-digs, saving time and money. It is the ideal solution for utility, excavating and heavy equipment operators who frequently work around utilities.
The EZDepth gives operators real-time depth feedback, which helps improve job quality and increases productivity by reducing over-digs, saving time and money.
The built-in laser pointer provides operators with a real-time indication of where their bucket cutting edge is relative to their target depth. The laser pointer is visible in daylight conditions and it helps operators dig precisely at their target depth throughout the entire work area.
The EZDepth system consists of two main components: The main unit that fits onto your machine’s boom arm and includes a laser pointer, while the second part sits inside your cab and displays data as well as provides controls for setting up your desired depth.
ziplevel ezdepth for excavators – ezd-30 |Features and Benefits
The ziplevel ezdepth is the most versatile grade control system on the market today. It provides both elevation and position information from a single sensor that can be mounted to any piece of heavy equipment or even a tripod or pole.
The ziplevel ezdepth revolutionizes grade control by providing high accuracy elevation information in a simple user interface requiring only one button press to take an elevation reading. The system also has a bar graph display showing target depth, so you don’t have to keep checking your plans.
The patented reflectorless technology uses laser light to measure the elevation of any object at a distance up to 150 feet, making it ideal for construction sites where access is limited and traditional surveying methods are difficult or impossible.
This allows operators to work quickly without waiting for surveyors who may be busy elsewhere on site. It also eliminates the need for expensive GNSS systems that require line of sight between satellites and antennas when working under cover or inside buildings where there’s no cell service available.
This revolutionary new product from ziplevel enables the operator to accurately position the bucket at any desired depth at any time during the excavation process. Unlike other tools currently on the market, however, the Cab-EZD-30 also enables the operator to accurately hold this desired depth as he moves back and forth across or around the job site working area.
This feature significantly increases production rates when compared to other systems currently available on the market today.
ezdepth for excavators – ezd-30 is an effective laser ground range finder which is used in the construction engineering industry.
