The Rexorth A10CO/ A10CNO Hydraulic Pump For Oilfield Applications has been designed to meet the high demands of the oilfield, including severe operating conditions and harsh environments. The Rexorth A10CO/ A10CNO Hydraulic Pump For Oilfield Applications is a compact, single-stage pump that features a high flow capacity with a low pressure loss. The Rexorth A10CO/ A10CNO Hydraulic Pump For Oilfield Applications has been designed for applications such as drilling rigs, well servicing rigs and other mobile equipment.

The Rexorth A10CO/ A10CNO Hydraulic Pump For Oilfield Applications is available in various sizes with options for different pressure ranges and flow rates. The Rexorth A10CO/ A10CNO Hydraulic Pump For Oilfield Applications has an open frame design that allows easy access to internal components and enables quick maintenance or repair when necessary.

Ko te Rexorth A10CO Hydraulic Pump and Rexorth A10CNO Hydraulic Pump are suitable for a wide range of applications in oilfield service, including fracturing operations, coiled tubing, acidizing, cementing and drilling.

The A10CO is a centrifugal pump with an integrated oil cooler that can be used on rigs from 80-500 HP. The A10CNO is a diaphragm pump with an integrated oil cooler that can be used on rigs from 150-1500 HP. Both models feature an integral hydraulic reservoir and an overpressure relief valve to protect the hydraulic system against over-pressuring.

Both pumps are available in single or double suction configurations with NPT threads or BSP threads. They are designed for use in temperatures up to +100°C (212°F). Both models meet ISO 6149 standards for pressure ratings and have been successfully tested by Rexorth at pressures up to 3000 bar (42000 psi).

The A10CO/A10CNO pumps offer several advantages over traditional centrifugal pumps: they require less maintenance; they produce less noise; they have better pressure regulation characteristics; and they consume less energy than mechanical shaft drives.

These pumps consist primarily of the aluminum main pump body, with a high-pressure gear set (steel) and the drain port housing (steel).

It has been designed for use in agricultural equipment and construction equipment applications. The Rexorth A10CO/ A10CNO hydraulic pump is also available in an explosion-proof version.

The Rexorth A10CO/ A10CNO hydraulic pump, like all other Rexroth pumps, is manufactured under ISO 9001 quality management system certification. This ensures that each unit meets the highest performance standards and delivers optimal performance.

The Rexroth A10CO/ A10CNO Hydraulic Pumps have been specially designed for use in agricultural machinery or construction equipment applications where maintenance-free operation is an important factor. These pumps can be used at temperatures up to 110°F (43°C) without any lubrication required.

In the A10CO model, a separate flow divider and inlet filter housing assembly are integrated into the pump body.

The Rexorth A10CO/ A10CNO hydraulic pump is designed for use with a variety of agricultural implements including sprayers, sprayers, fertilizer spreaders and sprayer rotary hoes. The Rexorth A10CO/ A10CNO hydraulic pump has been designed to meet the requirements of agriculture machinery manufacturers and end users alike.

The Rexorth A10CO/ A10CNO hydraulic pump features an oil return system that eliminates cavitation in the suction line of the centrifugal pump and extends pump life by preventing wear on the impeller. An integral return line filter helps prevent contamination of the hydraulic fluid in the event of a fluid leak within the hydraulic system. The Rexorth A10CO/ A10CNO hydraulic pump is available in three different models: the standard Rexorth model with a standard flow divider; the Rexorth high flow model with a high capacity flow divider; and the Rexorth super high flow model with an additional bypass valve installed on top of the standard flow divider allowing for maximum flow capacity at all operating speeds.

In the A10CNO model, the flow divider is located inside the pump body.

Rexroth A10CO/ A10CNO Hydraulic Pump is a double-acting hydraulic pump of the oil-injection type. It is used in mobile machinery and equipment as a drive unit for axial piston pumps. The pump is designed for continuous operation without periodic maintenance, such as oil changes, because it is sealed against dust and contamination by using an internal oil reservoir. The compact design of the pump makes it possible to use multiple pumps in parallel or series operation. The standard configurations are available with different flow rates and pressure ratings ranging from 3 to 500 l/min at pressures up to 2,000 bar (29,600 psi).

The flow divider and filter assembly are also made of aluminum.

The Rexorth A10CO/ A10CNO Hydraulic Pump is a high-performance pump with a single-stage piston and a pressure of up to 9,000 psi. It is designed for use in applications that require high flow rates and pressures, such as agriculture, construction, mining and industrial applications. The Rexorth A10CO/ A10CNO Hydraulic Pump is available in two configurations: a standard configuration that operates at 2,500 psi and an extended configuration that operates at 3,500 psi.

The Rexorth A10CO/ A10CNO Hydraulic Pump provides excellent durability through its forged steel crankshaft and forged steel connecting rods. These parts are designed to withstand higher pressures than their cast iron counterparts so they can be used over longer periods of time without becoming damaged or worn out from long-term use in demanding applications like agriculture or construction where many different types of heavy machinery need to operate simultaneously without any problems occurring due

The connectors between these assemblies are realized through adaptors and flanges.

Rexorth A10CO/ A10CNO Hydraulic Pump is widely used in construction machinery, mining machinery, metallurgy machinery and other industrial machinery. It can be used for high and low pressure applications, with a pressure range of 0-2000 bar (g). The hydraulic pumps are available in single or double acting versions, with a mechanical seal or without mechanical seal.

The Rexroth A10CO/ A10CNO Hydraulic Pump is suitable for applications where high-temperature fluids must be transported from one place to another. The pump has a compact construction that allows it to work reliably even under extreme conditions. The pump has a compact design that saves space and makes it easy to install even in small places like underground mineshafts where space can be limited.

The Rexorth A10CO Hydraulic Pump and Rexorth A10CNO Hydraulic Pump series is an ideal fit for oilfield applications such as fracturing, coiled tubing, drilling and cementing operations.

The pump has been designed with a compact construction and low weight that makes it easy to install and maintain. It features a cast iron housing with a stainless steel cover that ensures superior corrosion resistance in harsh environments. The A10CO/A10CNO hydraulic pump series also features an integrated pressure relief valve (PRV) that protects the system from overpressure.

The A10CO/A10CNO hydraulic pump series is available in several configurations and sizes, including 2-stage or 3-stage units with maximum flow rates up to 10,000 l/min (2,600 gpm). Power ratings range from 1.5 kW to 2 kW depending on the size of the unit.

We are a professional hydraulic pump factory and have been working in this industry for several years. The Rexorth series A10CO/ A10CNO Hydraulic Pump For Oilfield Applications, is one of our many products. We have invested a lot in manufactures to be able to ensure good quality and competitive price. If you are interested in any of our products ,please contact us!