The Rexroth A11VLO/A11VG is a low oil pressure alarm. It is used to monitor the lubrication level of an oil-lubricated gear pump. The A11VG and the A11VLO are identical except that they are built and tested to different standards. The A11VG has been built and tested in accordance with European Standard EN ISO 3834-1, while the A11VLO has been built and tested to American National Standards Institute standard Z3.22-2000 (E29). Both versions have been tested with diesel oil at an ambient temperature of 20°C (68°F) and have been certified by a third party testing laboratory (TÜV).
The alarm consists of an integrated pressure transducer and an electronic circuit board. The sensor converts the mechanical pressure from the gearbox into an electrical signal that can be read by electronics inside the gear pump housing or other control device such as a PLC controller. An audible alarm sounds when there is insufficient lubrication in the gearbox due to low oil level or high temperature conditions which may cause premature wear on components within your system.
The pump type of Rexorth A11VG Hydraulic Pump/Rexorth A11VLO Hydraulic Pump is piston.
Piston pumps are the most common type of oil pump used in vehicles. They use pistons to move the oil from one chamber to another. There are two types of pistons: single-acting and double-acting. Single-acting pistons only move one way, while double-acting pistons move both ways. Double-acting pistons are more efficient and can be used to pump more than one fluid at a time.
The A11VLO/A11VG uses single-acting pistons with a single barrel on each piston that has two chambers separated by a check valve (one side of the valve opens when it receives pressure and closes when it doesn’t receive pressure). The check valves allow the pump to be filled with fluid under low pressure, but they also prevent fluid from flowing out of the pump if there is no oil pressure or power applied to it.
The A11VLO/A11VG has a low oil pressure alarm with auto stop.
The Rexorth A11VLO and A11VG hydraulic pumps are designed for high pressure applications where precision and reliability are required. They have been used in the food and beverage industries for many years. The A11VG is the smaller model of the two, but it still has a high flow rate of 26 GPM (1.04 m3/hr).
The Rexorth A11VLO can be equipped with an optional PLC control system that allows the operator to control all functions of the pump from a remote location. This makes it ideal for use in remote locations where conditions may not be optimal or there may be safety concerns.
The swash plate angle of the Rexorth A11VLO/A11VG is 15, 22 or 24 degrees.
The Rexroth A11VLO/A11VG hydraulic pump is a variable displacement piston pump which can be mounted in any position. It is often used as an auxiliary pump mounted in front of a main hydraulic pump. This allows the use of a smaller main hydraulic pump and increases the overall efficiency of the system. Another important application for this type of pump is in hydraulic systems with high temperature or multiple circuits where it needs to be split into smaller sections.
This Rexroth pump serves as a replacement for pumps in passenger car engines and construction machines.
Rexroth A11VG Pump
The Rexroth A11VG Hydraulic Pump serves as a replacement for pumps in passenger car engines and construction machines. It is used as a hydraulic pump to transfer oil from the reservoir to the cylinder block. The A11VG is available with a variety of mounting configurations, styles and materials to ensure it is compatible with your engine application.
Rexroth A11VLO Pump
The Rexroth A11VLO Hydraulic Pump serves as a replacement for pumps in passenger car engines and construction machines. It is used as a hydraulic pump to transfer oil from the reservoir to the cylinder block. The A11VLO is available with a variety of mounting configurations, styles and materials to ensure it is compatible with your engine application.
The A11VLO/A11VG has a maximum displacement of 63 cm3.
The A11VLO/A11VG is a compact and lightweight oil pump with a maximum displacement of 63cm3. The pump features a mechanically lubricated piston, an aluminum housing and an integrated shaft seal. This makes it ideal for applications where space is limited or where contamination of the oil is to be avoided.
The A11VLO/A11VG is designed for use in hydraulic circuits, as well as for fuel injection systems in aviation engines and other applications where high pressures and temperatures are encountered. It can also be used to provide pressure for pneumatic systems such as air brakes, auxiliary braking systems and steering assistance systems.
Applications include: hydraulic circuits with hydraulic motors; hydraulic power steering; aircraft braking systems; fuel injection systems in aviation engines (e.g. for turboprop engines).
This pump has a maximum continuous speed of 3000 RPM and an intermittent speed of 3800 RPM.
The Rexorth A11VG Hydraulic Pump is designed for high-pressure hydraulic systems, such as those used in agricultural machinery. This Rexroth pump is known for its reliability and durability.
The Rexroth A11VG Hydraulic Pump comes with a heavy-duty cast iron housing, which means that it can withstand the rigors of daily use. This also makes it ideal for applications where vibration is an issue. The Rexroth A11VG Hydraulic Pump features a double suction design that keeps it running smoothly even when under a heavy load.
The maximum pressure given by the A11VLO/A11VG is 280 bar.
The Rexroth A11VG/A11VLO hydraulic pump is a high-pressure, high-flow, unbalanced three-stage axial piston pump for the supply of oil to hydraulic motors with high flow rates and relatively large displacements. It is designed for a wide range of operating pressures and temperatures. This pump can be installed as an integral motorized unit or used with an external motor. The standard motor is a 3-phase asynchronous motor with permanent magnet excitation.
With this hydraulic pump, the maximum rated speed is 3000 RPM, and the maximum intermittent pressure is 3150 RPM.
Rexroth hydraulic pumps are available in a wide range of sizes and power ratings. They are made up of a pump body, volute, impeller and other components. These hydraulic pumps are used in many applications such as agriculture, construction equipment and mining equipment etc. The Rexroth A11VG Hydraulic Pump is designed for high pressure and high flow applications where reliability and low noise level are required. It has a maximum continuous pressure rating of 30000 psi, with a maximum intermittent pressure rating of 31000 psi. This hydraulic pump is available in different sizes ranging from 1/4 to 2 HP.The A11VG Hydraulic Pump has an operating temperature range from -30°C to 60°C (86°F to 140°F).
This article tells you about some features of the Rexorth A11VG Hydraulic Pump/Rexorth A11VLO Hydraulic Pump.
The Rexorth A11VG/A11VLO is a high quality hydraulic pump that provides a wide range of options to suit all needs. The pump’s high-pressure piston pump design ensures a long lifespan, while its low operating noise makes it suitable for a wide range of applications including construction machinery, mining equipment and agricultural machinery.
The Rexorth A11VG/A11VLO hydraulic pumps have been designed with high efficiency in mind, so they are ideal for applications where power consumption is an important factor.
The Rexroth A11VLO/A11VG has been a proven part in thousands of industrial applications. It has given flawless service in its expansive applications.