Rexorth A2P: Powerful Hydraulic Pump for Liquid Applications
Rexorth A2P is a heavy duty hydraulic pump for liquid applications. It has a maximum flow rate of 500 GPM and a pressure of 18,000 PSI. It comes with a 1HP motor and is suitable for water, fuel, oil, and other liquid applications.
The Rexorth A2P has an aluminum body that provides better heat dissipation and ensures longer life. Its motor is protected by IP56 protection against water jets. The Rexorth A2P comes with a 1 year warranty period during which it can be serviced at any authorized Rexroth service center in the world.
Rexorth A2P Hydraulic Pump is a powerful and efficient pump for liquid applications.
Rexorth A2P is a powerful and efficient pump for liquid applications. It has been designed with a robust structure to ensure long-term service life. The Rexroth A2P Pump is suitable for the transport of liquids under pressure. It can also be used with oil and gas as well as water, fuel and other fluids.
The Rexroth A2P Pump is available in different sizes and types depending on the application. Different materials are used for the casing, which can be either cast iron or steel. The material used depends on the necessary performance level of the pump system. The Rexroth A2P Hydraulic Pump is designed for use in continuous operation at high temperatures up to 200°C (392°F). It is suitable for dry running conditions and for installations with oil mist or water spray mist generated by other machines nearby.
The pump is perfect for use in oil fields, steel mills, and many other industrial locations.
The rexorth A2P Hydraulic Pump is perfect for use in oil fields, steel mills, and many other industrial locations. The pump was designed to be used with a variety of different liquids and gases.
The rexorth A2P Hydraulic Pump is a high-performance hydraulic pump built to handle the most demanding applications. It has been designed for the most demanding environments and is capable of pumping products with viscosities up to 1000 cSt.
The rexorth A2P Hydraulic Pump is powered by an electric motor that produces 1 HP at 1750 rpm. It comes with an aluminum construction, which makes it lightweight but extremely durable. The pump can be mounted horizontally or vertically depending on your specific application requirements.
The pump features high-density construction with carbon rotors and diamond-hard vanes.
The pump features high-density construction with carbon rotors and diamond-hard vanes. It has a low-noise and low-vibration design, which meets the requirements of hydraulic systems in various industries such as automobile, aviation, energy, and military fields.
The Rexorth hydraulic pump is suitable for use in hydraulic systems that require high pressure and flow capacities. It has a compact design, high efficiency and reliability. It can be used for different kinds of vehicles or machinery to drive the transmission device.
It has a pressure range up to 6,000 psi, and works with a variety of liquids such as water, oil, and hydraulic fluids.
The Rexorth A2P Hydraulic Pump is a pressure pump that can be used in a variety of commercial and industrial applications. It has a pressure range up to 6,000 psi, and works with a variety of liquids such as water, oil, and hydraulic fluids.
The Rexorth A2P Hydraulic Pump consists of an external housing with an inner barrel that rotates as the piston moves in and out. The pressure generated by the rotating shaft is transmitted through the pistons to the inner barrel where it acts on the liquid being pumped.
The inner barrel is sealed at both ends by O-rings and machined grooves in its surface allow lubricant to pass between the piston rod end cap and inner barrel when the piston is moving outwards. When the piston moves back into its starting position, this lubricant is squeezed out past another O-ring located near the end of the rod into a reservoir or sump below where it can be recycled if desired.
The Rexorth A2P Hydraulic Pump can work at pressures up to 6,000 psi (414 bar) for short periods of time; however, since this type of pump relies on mechanical energy rather than hydraulic pressure for operation, extended use may cause damage
It boasts a constant flow rate of up to 38 gallons per minute.
The Rexorth A2P Hydraulic Pump is a heavy-duty pump that boasts a constant flow rate of up to 38 gallons per minute. The A2P is designed for use in hydraulic systems and is commonly used in construction equipment, mining vehicles, and other industrial applications.
The Rexorth A2P Hydraulic Pump has an extra large fluid capacity that allows it to handle high pressure without experiencing cavitation issues. This makes it ideal for any application where the fluid being pumped has a high viscosity.
The Rexorth A2P Hydraulic Pump features a corrosion-resistant housing made from cast iron and aluminum alloys that can withstand extreme temperatures ranging from -40°F (-40°C) to +250°F (+121°C). Its lightweight design allows for easy installation, while its durability ensures long-term performance.
The Rexorth A2P also allows for quick and convenient installation due to its modular design.
The Rexorth A2P is an hydraulically driven pump that is designed to work with a wide range of flow rates and pressure levels. The pump has been designed as a replacement for many of the older style hydraulic pumps that were commonly used in older machines.
The Rexorth A2P is able to be used in many different applications including agricultural machinery, construction equipment and even mining equipment. One of the main advantages of using this type of pump over other types of pumps is that it allows for easier servicing and maintenance because all of the components are easily accessible without having to disassemble most of the machine first.
De Rexorth A2P Pump is an industrial-grade hydraulic pump well suited for continuous operation at high pressures.
The Rexorth A2P is a high performance, high pressure pump suitable for use in a variety of industrial applications. It features an oil-free design with an integrated air mixing chamber to provide very low air contamination levels. The Rexorth A2P features a cast aluminum housing and shaft, which results in increased durability and reduces the weight of the pump by up to 50%.
Rexorth’s patented oil-free technology combined with our proprietary HVRS (High Voltage Reliability System) design allows our pumps to withstand repeated start-ups and shutdowns without any damage or loss of performance. This makes them ideal for applications where frequent start/stop cycles are required, such as agricultural equipment or mobile equipment that needs to be started regularly for maintenance checks or repairs.
Rexorth’s A2P Series is designed for heavy-duty liquid applications and is available in a wide range of sizes. If your application requires high fluid flow, you may want to consider Rexorth’s A2P Series.
