The Linde Hydraulic Pumps are designed for a broad range of applications, including construction equipment, agricultural machinery, mining equipment and many other heavy duty applications. The Linde HPR-02 hydraulic pump is a high pressure unit with a maximum flow rate of 4.0 gallons per minute at 6000 psi, making it ideal for applications requiring high pressures but low flow rates. The pump has been tested and certified to meet the requirements of ANSI B50.1-1986 standards as well as ASME B30.1-1986 standards for use in mobile cranes and hoists with capacities up to 30 tons at 6000 psi.

The Linde HPR-02 hydraulic pump is a compact and powerful pump for a wide range of applications. The shaft is supported by ball bearings and the housing is made from cast iron. The piston rod is made from high strength steel and can be fitted with a wide range of different piston heads.

The Linde HPR-02 is suitable for both mobile and stationary use, including agricultural, construction and mining industries.

HPR-02 Hydraulic Pump is highly energy efficient hydraulic unit providing stable and uninterrupted power supply, which is essential for smooth running of industrial machinery.

The pump is driven by a motor through a gear box. The motor can be single or three phase asynchronous motor with open type permanent magnet or wound field synchronous motor. The motor drives the pump through a gear box to produce high pressure water at desired flow rate and pressure by means of centrifugal pump mechanism.

The pump head consists of pressure vessel with inlet and outlet valves, usually two valves are provided in one head so as to maintain balanced system pressure in case of one failure. A coupler connects between the head and suction pipe line, where as discharge pipe line connects to auxiliary equipment such as air receiver, filter etc.

This hydraulic pump design is rugged and compact. It can deliver volumetric flows as high as 40 l/min with a peak pressure of 350 bar.

The two-stage piston pump has a modular design, so it can be easily adapted for various applications such as mining and construction equipment, agricultural machinery, trucks and buses, marine vessels and other mobile equipment requiring high power at low weight.

The pistons have a central hole to allow coolant flow under the pistons to reduce friction. The shafts are made from forged steel with a special coating that enables them to withstand high temperatures without losing their strength or hardness. The shafts are secured in position by means of two bearings on each side of the housing cover. The cover itself is made from cast aluminium alloy with a protective coating against corrosion or wear.

This hydraulic pump design is fitted with an oil-free seal system which uses compressed air for sealing rather than oil. This means there is no need for external oil supply lines or an oil reservoir in the machine itself.

The pump operates using a closed-loop control system that ensures maximum efficiency over its entire operating range by automatically adjusting the speed according to load changes and operating conditions.

The Linde HPR-02 Hydraulic Pump has a robust polymer housing with a functional design, which allows easy installation in confined spaces. This makes the unit suitable for a wide range of demanding applications.

The pump is designed for use in applications where low noise and maintenance are essential. The compact design allows it to be installed in places where space is limited, such as on top of a tank or in small spaces between machinery.

The pump has been designed for use with hydraulic systems that require high flow rates and high pressure over a long period of time. It is built to withstand extreme conditions and provide reliable performance for many years.

This Hydraulic Pump is designed to operate at high speeds without any load loss. It can be used in conjunction with positive displacement motors, single or double gear pumps, centrifugal pumps and piston pumps.

It has a rigid structural design and is built for heavy duty applications. The pump is made from durable materials and is highly resistant to corrosion and wear. The pump features an automatic pressure relief valve that protects against overloading and overheating.

The pump’s carbon steel body comes with a zinc plated finish which makes it highly resistant to rusting and corrosion. The pump also has a stainless steel shaft fitted with bronze bearings that ensure smooth performance over extended periods of time.

This hydraulic pump also features an external gearbox that reduces fluid leakage and noise levels while also increasing efficiency.

The HPR-02 features an integrated pressure regulating valve, which regulates the flow in one direction and also reduces pressure pulsations. Thus, it prevents damage to other equipment in the system. This helps increase system efficiency and extend the service life of the equipment.

In addition, the HPR-02 is designed with a dual check valve that prevents backflow into your water supply line when you remove the hose from your faucet. This ensures that no water will enter your home.

The HPR-02 also features a stainless steel swivel connector which is resistant to corrosion and rusting. This makes it perfect for use outdoors or anywhere else where water may be present.

The Linde HPR-02 Pump is suitable for use in heavy duty applications such as portable and stationary hydraulic machines, construction machinery, agriculture equipments, marine vessels and oil field exploration equip

The pump features a high pressure cast iron body with a stainless steel piston rod. The pump is fitted with a rubber mounting pad to absorb vibration and noise. The pump has an adjustable pressure regulator and a pressure gauge on the discharge head. The discharge head can be rotated 360 degrees on its shaft to allow easy fitting into any position. The hydraulic motor is mounted on the top of the housing with all wiring connections through flexible cables which are protected by rubber boots and sealed with silicone grease.

The pump has been designed for easy installation by anyone who has basic mechanical skills.

Linde hydraulic pumps are designed and created with the most demanding requirements of industrial, automotive and agricultural applications in mind. Linde hydraulic pump is ideal for multiple industrial applications, such as agriculture and construction are created for heavy-duty efficiency. Linde HPR-02 Hydraulic pump is easy to use a ruggedly-designed machine offers the highest reliability and ease of use.