The Linde HPV hydraulic pump is a heavy-duty industrial machine with high pressure and high volume. It is capable of handling both low and high viscosity fluids, and it can be used in both open and closed systems. The Linde HPV is suitable for a wide range of applications, including mining equipment, oil & gas production, construction machinery, marine vessels and other areas where high pressure or high flow rates are needed.
The Linde HPV uses a positive displacement pump design that uses a piston to move fluid from one chamber to another. The piston moves back and forth as it pumps the fluid through the system. This type of pump does not require any additional energy input once it has started up, so it is an ideal choice for large industrial operations where electricity may be limited or unreliable.
Linde HPV hydraulic pump is piston pumps that range in pressure from 2,000 psi to 6,500 psi.
Linde HPV hydraulic pumps are piston pumps that range in pressure from 2,000 psi to 6,500 psi. They are available in both positive displacement and variable displacement configurations. The positive displacement version is available with a single or double suction piston pump, while the variable displacement version is available with a single suction piston pump only. Both versions provide high flow rates with minimal pressure drop and can be used in many applications requiring high pressure at low viscosity fluids including water and oil based fluids. Linde HPV hydraulic pumps are commonly used for automotive cooling systems, air conditioning systems, truck cooling systems, refrigeration systems and more.
Linde HPV pumps can be used in all major applications including construction, forestry and marine equipment as well as material handling and mining.
Linde Hydraulic Pumps are designed for use with hydraulic fluid and can be used for many different applications. The pumps are built with a cast iron body that makes them durable enough to withstand heavy use. The pump also has an epoxy coated cylinder which helps it resist corrosion from chemicals or moisture that may get onto the cylinder during use.
The pumps come in two different types; one for high-pressure applications and one for low-pressure applications. The high-pressure pumps are designed to handle pressures up to 30 bar while the low-pressure pumps can handle pressures up to 10 bar.
They are available in open and closed circuit configuration, with displacements from 10cc/rev up to 63cc/rev at up to 4,000 rpm.
Linde HPV hydraulic pumps feature a compact design and are equipped with integrated electronic controls. They feature a high-efficiency motor that is optimized for minimal power consumption and low noise levels. The integrated electronic control system includes self-diagnostics for easy troubleshooting and maintenance.
Linde HPV hydraulic pumps are ideal for applications such as power steering, air conditioning, cooling systems and braking systems in passenger cars, trucks and off-road vehicles.
Most of the Linde HPV series pumps operate over a wide range of speeds (1,000 – 4,000 rpm).
Linde has developed a line of single stage, two stage and three stage hydraulic pumps that offer very high performance, long life and low noise levels. Most of the Linde HPV series pumps operate over a wide range of speeds (1,000 – 4,000 rpm).
The major advantage to using Linde hydraulic pumps is that they have been tested and approved by many major OEMs such as Caterpillar and Komatsu. Linde hydraulic pumps are also equipped with an internal relief valve which allows the pump to be operated at lower pressure than normal for a given flow rate or vice versa. This feature helps to prevent cavitation caused by pump imbalance by allowing some fluid out of the discharge line before it enters the impeller chamber. This can provide significant advantages in efficiency since less energy is wasted through cavitation than would otherwise occur if no relief valve were used in this application.
They are designed for continuous duty operation at high loads and are suitable for use with mineral oil or synthetic fluids.
Linde Hydraulic Pumps are available in single stage, two stage and four stage versions, with capacities ranging from 3 to 6 liters per minute. The pumps are suitable for use with a variety of hydraulic fluids including mineral oil and synthetic oils.
All Linde Hydraulic Pumps are constructed from aluminum alloy and stainless steel components which ensure long life, even under heavy duty operations.
They have rugged cast iron bodies, steel gears and roller bearings on the shafts supported by ball bearings in the housing.
Linde HPV Hydraulic Pump is designed for use in hydraulic systems for positive displacement applications such as those found in agricultural equipment, construction vehicles and mining equipment. The Linde HPV hydraulic pump is a rugged, compact design that features a cast iron body with steel gear and roller bearings on the shafts supported by ball bearings in the housing. The Linde HPV hydraulic pump is available in a wide range of sizes with flows from 10 – 100 gpm (37.9 – 378 L/min).
Linde has been designing and manufacturing pumps since 1879 and is recognized worldwide as a leader in the development of high quality industrial pumps. The company’s goal is to be recognized as the world’s leading supplier of industrial pumps and related services by providing its customers with products that meet or exceed their highest expectations while maintaining an uncompromising commitment to safety performance and quality service.
Linde HPV pump come in a variety of different displacements and offer high power density with exceptional reliability.
Linde Hydraulic Pumps are available in a variety of configurations to meet your specific application requirements. The Linde HPV series hydraulic pumps come in a variety of different displacements and offer high power density with exceptional reliability. The Linde HVHP series hydraulic pumps provide superior performance with high flow rates, large displacement and high torque capabilities.
For more information on Linde Hydraulic Pumps, contact your local Linde representative.
Linde Hydraulic Pumps are basically pumps that are used to deliver fluids like gas, oil, water and even sewage. These pumps have been around for years but today we take it for granted to see them being used in almost every industrial object that requires fluid delivery. Completely different from the pumps that we are equipped with, LInde Hydraulic Pumps also is advanced as compared to other types of pumps.