New Vickers VQA1 and VQA2 Vane Pumps

New Vickers VQA1 and VQA2 Vane Pumps

The VQA1 and VQA2 vane pumps from New Vickers have been designed for heavy-duty applications including industrial, agricultural, marine and utility applications.

The VQA1 is a single-stage vane pump that can be used to transfer water, oil or other liquids in a wide range of applications. It is available in several different shaft lengths, ranging from 3ft to 10ft.

The VQA2 is a two-stage vane pump that can be used for the same applications as the VQA1 but it has greater pumping capacity at higher pressures and flows. The VQA2 is available in two different shaft lengths: 6ft and 8ft.

Both models are equipped with high quality stainless steel bearings which provide excellent corrosion resistance and long life. They also feature an aluminum body design which helps reduce weight while maintaining strength and durability.

New Vickers VQA1 and VQA2 Vane Pumps
New Vickers VQA1 and VQA2 Vane Pumps

Vickers VQA1 vane pumps /Vickers VQA2 vane pumps have a robust design that provides reliable performance, quiet operation and low cost maintenance.

We have long been a supplier of superior quality centrifugal pumps, which have been designed to provide exceptional performance in a variety of applications. Our latest development is a range of high pressure vane pumps that can be used for both liquid and gas applications. The compact design makes these ideal for use on board ships, where space is at a premium.

The main benefit of a vane pump is that there are no moving parts within the pump itself, so there is no need for lubrication or maintenance. This means they are ideal for use in situations where regular maintenance would be difficult or expensive to carry out. The lack of moving parts also means they are very reliable and will not break down as easily as competing products on the market today.

The VQA1 is a compact vane pump that is ideally suited to high-pressure applications. It offers a wide range of flow rates, with an operating pressure up to 1,500 bar. The VQA2 is a larger vane pump with a larger diameter rotor and can handle higher pressures up to 2,000 bar. Both pumps are designed for use in water treatment plants and other industrial applications that require high-pressure liquid transfer.

Both the VQA1 and VQA2 are available in either single or twin shaft versions and with different outlet connections: hose (VQA1), hose (VQA2), flange (VQA1), flange (VQA2).

Each pump is built for high speed applications, with a market leading flow rate of up to 59 GPM (224 L/min).

Vickers Pumps has launched the VQA1 and VQA2 vane pumps. The two new models are designed for high speed applications, with a market leading flow rate of up to 59 GPM (224 L/min).

The VQA1 and VQA2 vane pumps were designed and built specifically for the US market, but can also be used in other areas of the world. They are built on the same platform as Vickers’ existing VQ series pumps, which are already well established in this market.

The new models feature an increase in power over their predecessors, with a maximum pressure of 4500 PSI (300 bar). This allows them to be used at higher speeds than before while still maintaining efficiency and reliability.

Both pumps have been designed with no external seals or packing material. This means they require less maintenance than some of their competitors and require fewer parts than other models on the market.

These pumps are also equipped with a high power-to-weight ratio which enables them to provide large volume flow at light weight.

The VQA1 is a single-stage, centrifugal, positive displacement pump. The design features a balanced impeller which allows for high volumetric efficiency and low operating costs. It is capable of operating in an open or closed circuit configuration in either horizontal or vertical positions. The VQA2 is a double-stage, centrifugal, positive displacement pump. The dual stage design offers the ability to handle higher volumes with lower horsepower requirements than single stage pumps. Both models are available in multiple sizes to meet any application requirement.

The VQA1 is equipped with replaceable wear liners for easy maintenance and repair. Both the VQA1 and VQA2 feature corrosion resistant materials that ensure long life without compromising performance in harsh chemical environments such as corrosive acids and caustic solutions.

The Vickers VQA1 vane pumps /Vickers VQA2 vane pumps meet or exceed the highest industry standards.

The VQA1 and VQA2 vane pumps are high-performance, high-reliability, high-efficiency hydraulic pumps, designed to meet or exceed the highest industry standards. The pumps feature a compact design with low noise levels and are ideal for use in industrial machinery, agricultural equipment and vehicles.

The pumps can deliver flow from 0.5 to 25 cubic meters per hour at pressures up to 12 bar (170 psi) at a temperature range of -30 to 85 degrees Celsius.

The VQA1 is available with an impeller diameter of 20 inches (508 millimeters), while the VQA2 has an impeller diameter of 24 inches (610 millimeters). Both models feature a power rating of up to 63 hp at 1800 rpm and are equipped with a mechanical seal protection system for continuous operation under oil mist conditions.

New Vickers VQA1 and VQA2 Vane Pumps
New Vickers VQA1 and VQA2 Vane Pumps

If you need a new vane pump, contact us today to take advantage of our special introductory promotion.

The New Vickers VQA1 and VQA2 are the latest additions to our line of high performance vane pumps. These new models offer increased reliability, better performance and lower operating costs. Both models feature a large range of speeds and flow rates designed to deliver superior performance in any application. The VQA1 is designed for use in industrial water applications while the VQA2 is ideal for residential applications such as fire protection and domestic water supply.

These pumps have been designed using state of the art technology that makes them extremely reliable, durable and efficient. They are also easy to install and maintain which makes them ideal for commercial applications where downtime is not an option.

With the Vickers VQA1 Vane Pump and Vickers VQA2 Vane Pump, whether you are new to this technology, or a seasoned veteran, you’ll be delighted to find that these pumps have been designed for easy maintenance and operation. Easy to install, simple to operate and designed for all situations, both meet end users expectations with highly cost-effective performance.

Leave a Reply

Your email address will not be published.